Stummschaltung der Soundkanäle SB 1024 Live

U

User 16

Blicks mal wieder nicht: :(

In der Wiedergabesteuerung sind die meisten channels bei mir abgeschaltet, also Ton aus. Wenn ich bei einem Channel ton einschalte, geht er woanders wieder aus.

Was soll dass denn?

Danke schonmal
 
U

User 147

Hi Denny,
ich hab das gleiche problem, aber auch eine loesung.:
du musst "Digital Output Only" verwenden.
klick entweder im normalen mixer unter "volume" auf "advanced" (oder erweitert / weitere einstellungen)(?)) und setz einen haken in das kaestchen.
geht auch im creative mixer selbst, ueber main volume ist ein kleines rotes kreuz, da draufgeklickt und der dialog poppt hoch.

hier noch eine erklaerung aus der hilfe:

Digital Output Only is an advanced control of the VOL control in the Mixer deck. Enable this feature when you connect digital speakers to your audio card.
When both this feature and the "What U Hear" option are turned on, you can record from more than one of these analog audio input sources

Auxiliary In
CD Audio
Microphone
Line In
TAD In

at the same time. When the "What U Hear" option is on but Digital Output Only is off, you can keep only one of these analog audio input sources unmuted at a time. For example, if you try to record from CD Audio, you cannot record from Microphone simultaneously.

When Digital Output Only is active, you can select and position more than one analog audio input source in the Main deck (Effects view) simultaneously. They will be positioned together; the effects setting for analog audio input sources is common to the group.
When Digital Output Only is active, it is recommended that you do not connect analog speakers as your output. You will get no sound from an analog 2-speaker system, or sound from only the rear speakers of an analog 4-speaker setup.

Make sure that the devices to which you want to record are connected via their digital inputs.
 
Zurück
Oben