Installation BRD pro

[User 730]

Hallo.

Ich habe beim Installationsversuch der Pedale folgendes Problem.
Wenn ich sie reinstecke werden sie bei den Gamecontrollern erkannt.
Im Spiel (GTL) kann werden sie zwar als vorhandene Controller angezeigt,
auswählen für Gas/ Bremse kann ich sie jedoch nicht.

Jemand ne Idee?

 

[User 20]

Ich habe die USB Version der BRD Pro Pedale und hatte dieselben Probleme. Ich hatte
damals auch ewig rumgecheckt. Leider kann ich Dir nicht mehr sagen was zum Ziel
führte.
Probier mal diesen Abschnitt meiner PLR Datei.

Axis [00, 00] Dead Zone="0.00000" // Controller 1 X
Axis [00, 00] Sensitivity="0.51000"
Axis [00, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues)
Axis [00, 01] Dead Zone="0.00000" // Controller 1 Y
Axis [00, 01] Sensitivity="0.51000"
Axis [00, 01] Center="0.50000"
Axis [00, 02] Dead Zone="0.00000" // Controller 1 Z
Axis [00, 02] Sensitivity="0.50000"
Axis [00, 02] Center="0.50000"
Axis [00, 03] Dead Zone="0.00000" // Controller 1 RX
Axis [00, 03] Sensitivity="0.50000"
Axis [00, 03] Center="0.50000"
Axis [00, 04] Dead Zone="0.00000" // Controller 1 RY
Axis [00, 04] Sensitivity="0.50000"
Axis [00, 04] Center="0.50000"
Axis [00, 05] Dead Zone="0.00000" // Controller 1 RZ
Axis [00, 05] Sensitivity="0.50000"
Axis [00, 05] Center="0.50000"
Axis [00, 06] Dead Zone="0.00000" // Controller 1 S0
Axis [00, 06] Sensitivity="0.50000"
Axis [00, 06] Center="0.50000"
Axis [00, 07] Dead Zone="0.00000" // Controller 1 S1
Axis [00, 07] Sensitivity="0.50000"
Axis [00, 07] Center="0.50000"
Axis [01, 00] Dead Zone="0.00000" // Controller 2 X
Axis [01, 00] Sensitivity="0.50000"
Axis [01, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues)
Axis [01, 01] Dead Zone="0.00000" // Controller 2 Y
Axis [01, 01] Sensitivity="0.00000"
Axis [01, 01] Center="0.50000"
Axis [01, 02] Dead Zone="0.00000" // Controller 2 Z
Axis [01, 02] Sensitivity="0.00000"
Axis [01, 02] Center="0.50000"
Axis [01, 03] Dead Zone="0.00000" // Controller 2 RX
Axis [01, 03] Sensitivity="0.50000"
Axis [01, 03] Center="0.50000"
Axis [01, 04] Dead Zone="0.00000" // Controller 2 RY
Axis [01, 04] Sensitivity="0.50000"
Axis [01, 04] Center="0.50000"
Axis [01, 05] Dead Zone="0.00000" // Controller 2 RZ
Axis [01, 05] Sensitivity="0.50000"
Axis [01, 05] Center="0.50000"
Axis [01, 06] Dead Zone="0.00000" // Controller 2 S0
Axis [01, 06] Sensitivity="0.50000"
Axis [01, 06] Center="0.50000"
Axis [01, 07] Dead Zone="0.00000" // Controller 2 S1
Axis [01, 07] Sensitivity="0.50000"
Axis [01, 07] Center="0.50000"
Axis [02, 00] Dead Zone="0.00000" // Controller 2 X
Axis [02, 00] Sensitivity="0.50000"
Axis [02, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues)
Axis [02, 01] Dead Zone="0.00000" // Controller 2 Y
Axis [02, 01] Sensitivity="0.50000"
Axis [02, 01] Center="0.50000"
Axis [02, 02] Dead Zone="0.00000" // Controller 2 Z
Axis [02, 02] Sensitivity="0.50000"
Axis [02, 02] Center="0.50000"
Axis [02, 03] Dead Zone="0.00000" // Controller 2 RX
Axis [02, 03] Sensitivity="0.50000"
Axis [02, 03] Center="0.50000"
Axis [02, 04] Dead Zone="0.00000" // Controller 2 RY
Axis [02, 04] Sensitivity="0.50000"
Axis [02, 04] Center="0.50000"
Axis [02, 05] Dead Zone="0.00000" // Controller 2 RZ
Axis [02, 05] Sensitivity="0.50000"
Axis [02, 05] Center="0.50000"
Axis [02, 06] Dead Zone="0.00000" // Controller 2 S0
Axis [02, 06] Sensitivity="0.50000"
Axis [02, 06] Center="0.50000"
Axis [02, 07] Dead Zone="0.00000" // Controller 2 S1
Axis [02, 07] Sensitivity="0.50000"
Axis [02, 07] Center="0.50000"
Control - Accelerate="(1, 33)"
Control - Brake="(1, 35)"
Control - Steer Left="(1, 2)"
Control - Steer Right="(1, 1)"
Control - Shift Up="(1, 20)"
Control - Shift Down="(1, 19)"
Control - Neutral="(0, 89)"
Control - Reverse Gear="(0, 89)"
Control - First Gear="(0, 89)"
Control - Second Gear="(0, 89)"
Control - Third Gear="(0, 89)"
Control - Fourth Gear="(0, 89)"
Control - Fifth Gear="(0, 89)"
Control - Sixth Gear="(0, 89)"
Control - Seventh Gear="(0, 89)"
Control - Clutch In="(1, 4)"
Control - Toggle AI Control="(0, 23)"
Control - Display Mode="(0, 89)"
Control - Change View="(0, 42)"

 

[User 20]

Ich glaube nur der Abschnitt wäre relevant:

Control - Accelerate="(1, 33)"
Control - Brake="(1, 35)"
Control - Steer Left="(1, 2)"
Control - Steer Right="(1, 1)"

Ich habe an den Zahlen solange gedreht bis es ging.

 

[User 730]

Ich werds heut Abend mal testen, danke.