[GPL] **RDave's 3d helmet upgrade**

[User 62]

RDave has released the 3d helmet upgrade for his BRM P261, please note the readme for credits and important installation information. Also if you do not have the BRM P261 it is available from the GPL Engine Works.
http://www.ionet.net/~ibtokc/p261_helmets_3d.zip

 

[User 62]

Optional BRM P261 3d helmet with visor

Optional BRM P261 3d helmet with visor
Hi all,

Yesterday I posted a 3d helmet for the BRM P261. Based upon my preference, I had made it without a visor. I personally liked the look. You can find a screenshot of it here:

http://forum.racesim.net/showthread...=&threadid=7046

However, I decided to go ahead and make with with the visor for those of you who like the look of the visor. I'm attaching a screenshot for you to check it out. I'll post the zip below.

Cheers,
Rdave

pic

p261_3dhelmet_visor.zip

 

[User 62]

Stewart helmet for the BRM...

Hey guys,

I was just over at the LC forum and found that JPHovercraft has done a number of helmets for the Eagle. However, one of them was the Jackie Stewart helmet which fits in perfectly with the new 3d helmets for the BRM P261. Here's the link to his stewart helmet and check out the thread for others as well. I'm going to post a screenshot of what the helmet looks like on the BRM.

To use it, you must have the 3d helmet patch, either with the visor or without, then rename the downloaded mip to "stehelm.mip" and drop it in your BRM directory.

Here's the link to the helmet:

http://home.kawartha.com/~kprice/plahelm_stewart.mip

and his others are in the LC forum gpl addons forum.

Some have asked about using the P261 car for other versions of the BRM such as Berca's. If you're interested, it's rather simple. Install the P261, then use Berca's cars skins and brmeng7.mip. Don't overwrite any car number.3dos or you'll mess up the 3d helmets.

That aside, stewart looks great in the P261 and his new helmet.

Thanks JP for the great helmet!

Cheers,
Rdave

 

[User 62]

Updated 3d Helmet for the BRM P261...
Hi all,

I've updated the 3d helmet patch for the BRM P261 to include JPHovercrafts new Jackie Stewart AI helmet. If you've already downloaded the patch and want to add this great new helmet, you can download just the helmet here:

http://home.kawartha.com/~kprice/plahelm_stewart6.mip

Just unzip to your BRM P261 directory and rename it "stehelm.mip" and you can discard the generic one of the same name that was included in the initial release. If you haven't downloaded the 3d helmet patch, you can find it here:

http://forum.racesim.net/showthread...55628#post55628

and it now contains JP's new Stewart helmet.

Cheers,
Rdave