Fanatec Software - Das FanaLab

U

User 7651

Gestern habe ich wieder mal den neusten Treiber von Fanatec "402" installiert und die Firmware entsprechend akualisiert.... (Den hatte ich schon mal kurz drauf, habe dann aber wieder den alten installiert)

Was mir beim neusten Treiber aufgefallen ist, dass ich das FFB in RRE im Game, sowie am Lenkrad auf 100% stellen muss und es für mich gerade so in der Härte noch geht. Ich fahr grundsätzlich nicht ein so hartes Lenkrad.... :gruebel:

Auch wenn ich einlenke, macht das Lenkrad so komische Vibrationen, so wie ein Zahnrad nicht richtig in den Zähnen laufen würde..... Komisch ????
Dies ist auch in AC spürbar und fühlt sich komisch an ?

Ich habe noch eine V2-Base und ein McLaren-Lenkrad.
 
U

User 10300

Gestern habe ich wieder mal den neusten Treiber von Fanatec "402" installiert und die Firmware entsprechend akualisiert.... (Den hatte ich schon mal kurz drauf, habe dann aber wieder den alten installiert)

Was mir beim neusten Treiber aufgefallen ist, dass ich das FFB in RRE im Game, sowie am Lenkrad auf 100% stellen muss und es für mich gerade so in der Härte noch geht. Ich fahr grundsätzlich nicht ein so hartes Lenkrad.... :gruebel:

Auch wenn ich einlenke, macht das Lenkrad so komische Vibrationen, so wie ein Zahnrad nicht richtig in den Zähnen laufen würde..... Komisch ????
Dies ist auch in AC spürbar und fühlt sich komisch an ?

Ich habe noch eine V2-Base und ein McLaren-Lenkrad.

Motorkalibrierung anschließend gemacht?


Gesendet von iPhone mit Tapatalk
 
U

User 3191

hallo Ihr,
weiß jemand wie und ob ich die Drehzahl LED´s am Formula V2 ausschalten kann?
Hab schon alles versucht, ohne Erfolg. Wenn man in einem dunklen Zimmer und auf einer dunklen Strecke fährt, blenden die LED´s
Fahre rfactor 2, falls das noch wichtig wäre
 
U

User 21046

Vielleicht hilft das ja:

Navigate to "rFactor2\UserData\Controller\ClubSport Wheel.ini" and look for these two lines:


  • Use Additional Hardware Features="1" // Whether to use additional hardware features like steering wheel LEDs
  • Hardware 3Digit Display="1" // If hardware has 3-digit display, 0=off, 1=gear, 2=speed
If you change the "1" values to "0", native support will no longer be enabled.

vermutlich heißt die Datei bei dir bloß nicht clubsport Wheel.ini sondern csl.ini oder so ähnlich.
 
U

User 3191

Das habe ich auch versucht. Irgendwie übernimmt def Nix was ich da einstelle. Ich Speicher das Profil ab und öffne rfactor. Aber LED leuchtet auch wenn schwarz
Ich glaube ich bin zu doof für die Software :-)
 
U

User 19771

Hast du das Profil auch auf "Default" gesetzt, damit es beim Start von rFactor auch immer automatisch direkt geladen wird?
 
U

User 16498

bei mir beendet sich die Software selbst nachdem ich das Lenkrad einschalte.. Base v2.5 + Mclaren Wheel v1. Die Pedale (v3) die am gleichen Hub hängen werden erkannt. gestern ging noch alles. Habt ihr sowas auch öfter oder verabschiedet sich langsam mein Mainboard?

Edit Treiber neu installiert und es wird wieder alle gefunden.
 
Zuletzt bearbeitet:
U

User 25074

Moin ich würde gerne anfangen etwas Rallycross in Iracing zu fahren. Habe eine DD1. Hat jemand ein Profil oder eine Idee welche Einstellungen man beachten sollte dass es sich realistisch anfühlt?
 
U

User 10470

Pünktlich zum CSL DD Versandstart wurde auch eine neue FanaLab Version v1.57.2 veröffentlicht, welche zahlreiche neue Features und Bigfixes mit sich bringt. Link: https://forum.fanatec.com/discussion/23638/fanalab-1-57-2-download-post-your-feedback-here/p1
Entsprechend habe ich meine DD2 Profile den neuen Features angepasst :)

Changelog for my profiles since last release in December 2020:

  • Implementation of the new Display Settings TC, ABS and Engine Map according to what the car uses in game (e.g. TC, ABS and Engine Map Display settings enabled with Prio 1 for GT3 cars in ACC but only TC and ABS enabled for GT4 cars in ACC and none of them enabled in the Maserati GT4 car because the Maserati doesnt use any assists and GT4 cars doesnt use Engine Map except for the Merc where Engine Map Display setting is enabled etc.)
  • Implementation of the new Display Setting Brake Bias for games which support this new feature (so for games which use full BB values instead of .2 increaments or so (AMS2 and F1 2020)
  • Updated Base ITM auto-page-switch settings to adapt to the new Display settings, so only use auto-page-switch for features which the car and game actually supports
  • Adjusted RPM Ranges for pretty much all 133 profiles
  • Slight FFB updates to the AMS2 car profiles
  • Changed LEDs for AMS2 Ginetta GT4 and McLaren 720S GT3 car profiles as per latest game updates
  • Added new AMS2 car profiles for new Patch 1.2 cars: BMW M8 GTE, Chevrolet Corvette C8.R, Porsche 911 RSR GTE, Cadillac DPi-VR & BMW M4 GT4
  • Massive FFB update to the iRacing car profiles: 22 profiles were changed quite drastically to adapt to iRacings newest FFB updates which came with NTMv7 as most profiles were based on NTMv6 which had different FFB strength ( so you dont need to be Hulk anymore to turn the wheel of the Ferrari 488 GT3 profile (and others) anymore :D ). Also no profile exceeds FF80 (=20Nm Peaks) anymore to make conversion to DD1 easier (multiply FF with 1.25) without the need to also adjust the Max Force and Wheel Force values
  • Slightly adjusted RevLED RPM values for cars in iRacing which use different RPM ranges per gear to find a „middle way“ to get the Wheel LEDs at least somehow being accurate as best as it gets until FanaLab might support this special iRacing „feature“ properly sometime in the future so you can adjust the RPM values for every gear where needed
  • Adjusted RevLED RPM values for iRacings Porsche 911 RSR car according to Season 3 changes
  • Added ABS FlagLEDs for iRacing car profiles where the car uses ABS indicators in the car dash
  • Added auto-page-switch feature when Oil Temp above 125°C for iRacing profiles according to native Oil Temp warning implementation with iRacing Season 2 Build
  • Added new iRacing car profiles for HPD ARX-01c, McLaren 570S GT4, McLaren MP4-30, NASCAR Cup Next Gen Chevrolet Camaro ZL1, Porsche 911 GT3 R, Subaru WRX STI
  • Added F1 2021 profiles (because of a FanaLab issue temporarily disabled auto-page-switch feature for Best Laptime on page 4 though)
 

Anhänge

  • ACC.zip
    93,6 KB · Aufrufe: 16
  • AMS2.zip
    46,2 KB · Aufrufe: 9
  • F1 2020.zip
    63,4 KB · Aufrufe: 5
  • F1 2021.zip
    29,9 KB · Aufrufe: 5
  • iRacing.zip
    102,2 KB · Aufrufe: 20
Zuletzt bearbeitet:
Zurück
Oben