Empfohlene Player.plr Einstellungen

U

User 713

Hallo!

Habe mir nun auf meinem neuen Rechner mein altes GTR1 installiert. GTR2 habe ich leider noch nicht. ;(

Jetzt wollt ich fragen, welche Player-plr-Einstellungen empfohlen werden, um das Spiel so realistisch wie möglich und grafisch so top wie möglich zu machen. Auch sonstige empfehlungen, um das Spiel aufzubohren (TOP-Addons z.B.) wären interessant.

Ich hoffe, dass sich noch irgendwer mit GTR1 beschäftigt oder ein gutes Gedächtnis hat. ;) Danke!
 
U

User 183

Ich weiss zwar nicht warum du noch GTR1 fahren möchtest, aber ich würde dir auf jeden Fall GTR2 wärmstens empfehlen. Das ist grafisch um Klassen schöner und auch speziell für Einsteiger besser zu erlernen als GTR1.

Falls es am Finanziellen scheitern sollte, GTR2 gibt es schon lange als Budget Titel für unter 15€.
 
U

User 713

So! Wie von Herrn Frischkorn gewünscht/empfohlen, habe ich mir nun GTR2 zugelegt. Daher möchte ich nun meine Frage nochmal nach oben pushen und um eine weitere ergänzen:

Hat jemand empfehlenswerte Einstellungen für das olle Logitech Formula Force GP in GTR2? Irgendwie bin ich da noch nicht zufrieden - so macht das Lenkrad z.B. auf eine Geraden eingenartige kleine Lenkbewegungen, die ich dann ständig korrigieren muss. Ich wäre für Hilfe sehr dankbar - noch bevor GTR Evolution diesen Bereich hier tötet.
 
U

User 2937

das hab ich bei meinem G25 auch, ich glaub das ist normal (falls du dieses aufschaukeln meinst)

ansonsten war hier mal ein beitrag wo diverse leute ihre settings veröffentlicht haben, weiß aber nimmer wie der hieß... such einfach mal nach "FFB einstellungen GTR2" oder sowas
 
U

User 2566

Hasst Du die FFB Kräfte umgekehrt? Bei mir musste ich dieses Häckchen setzen!


Und ausserdem:
"GTR Evolution wird hier bestimmt nix töten!"
 
U

User 713

Also, ja ich habe die ffb-effekte umgekehrt. Und ja, ich meine dieses aufschaukeln. Ich kann kaum anständig geradeaus fahren. Die Reduzierung der Lenkempfindlichkeit hat ein bisschen geholfen, aber... DAS KANNS DOCH NICHT SEIN!!!

Was ist denn los in GTR2? Die Controller-Einstellungen sind eigenartig. Die Physics scheinen mir auch arcadiger als in GTR1.

Also, hat da wer Abhilfe?

Edit: Gegen das Aufschaukeln habe ich nun bei GTR4U eine Lösung gefunden: SPSS auf 50 stellen.

Nun habe ich aber ein weiteres Problem: Wenn ich runterschalte, kommt es sehr oft vor, dass mehrere änge auf einmal geschaltet werden, so dass ich plötzlich zwei bis drei Gänge zu tief bin - ein Dreher ist dann nicht mehr zu vermeiden. Woran könnte das nun wieder liegen?
 
Zuletzt bearbeitet:
U

User 713

Benutzer 713 schrieb:
Nun habe ich aber ein weiteres Problem: Wenn ich runterschalte, kommt es sehr oft vor, dass mehrere Gänge auf einmal geschaltet werden, so dass ich plötzlich zwei bis drei Gänge zu tief bin - ein Dreher ist dann nicht mehr zu vermeiden. Woran könnte das nun wieder liegen?
Zum Vergrößern anklicken....

Also wenn hier jemand ein Rezept gegen kennt, wäre ich diesem Jemand zu höchstem Dank verpflichtet. Das Problem ist nämlich echt nervig. So ist Fahrem am Limit nicht möglich bzw. - andersherum - man fährt durch die Bank am Limit.
 
U

User 1328

Liegt entweder an den Microschaltern bei den Wippen/Buttons oder an der Feder beim Schalthebel. Wenn du den Logitech Profiler benutzt, kannst du dir dort (so hab ich das zumindest von anderen gehört) ein kleines Makro machen, dass das verhindert, indem es den Knopf einfach für ne halbe Sekunde oder so drückt.
 
U

User 1169

Kenne dieses Problem auch, kann nur an den Microschaltern liegen. Ganz kurz mal gezuckt und schon nen Gang zu Tief, oder umgekehrt. Hoffe da hat jemand mal ne Lösung Parat.

Gruss Marco
 
U

User 713

Also, leider hat bisher nix wirklich geholfen. Habe heute auch mal mein Lenkrad aufgeschraubt und den Kontakt angeschaut, sah für ein Laienauge wie das meine eigentlich ganz ordentlich aus - kein Staub usw., Kontaktspray hatte ich allerdings nicht zur Hand.
Das Eigenartige ist, dass ich beispielsweise bei NR2003 keine Probleme habe, da geht jeder Schaltvorgang in Ordnung. Daher meine Frage, kann es vielleicht doch auch mit der Sim zusammenhängen? Die Schaltprobleme sind bei GTR2 am eklatantesten, aber auch bei rfactor kommts ab und an mal vor.
 
U

User 713

Benutzer 2273 schrieb:
geh mal in deine PLR und probier das.


[ DRIVING AIDS ]
Repeat Shifts="0" // 0 = no repeat shift detection, 1 = detect and eliminate accidental repeat shifts, 2 = prevent shifting

hat schon manchem geholfen.

auf 1 oder 2 setzen.
musst es infach testen
Zum Vergrößern anklicken....

Diesen Eintrag gibt es in der plr von GTR2 leider nicht - und hier habe ich ja die größten Probleme.

Werde vielleicht nochmal mein Lenkrad deinstallieren und neu installieren - vielleicht hilft das ja.
 
U

User 841

Probier mal meine Einstellungen aus:
Vorher eine Sicherung der .plr machen und dann meinen Eintrag über Deinen kopieren.
Ich habe derweil ein rotes Momo und die VPP 3er Pedale. Hier der erste Teil:

Ach, und bitte die s.....s Smilies entfernen!!!!

[ Controls ]
Keyboard Steering="0.20000"
Keyboard Throttle="0.50000"
Keyboard Brake="0.50000"
Keyboard Clutch="0.50000"
Force Feedback="0"
Mouse Steering="0" // Use mouse left/right movement to steer
Mouse Throttle="0" // Use left mouse button to control throttle
Mouse Brakes="0" // Use right mouse button to control brakes
Mouse Gears="0" // Use mouse wheel to control gears
Mimic Steering="0" // Mimic AI or pitlane assistance with force feedback
Gear Select Button Hold="1" // Enable this option if using a gear select device that holds down a joystick button while in a gear and releases all buttons in neutral (such as the Act-Labs USB Shifter)
Alternate Rearlook Activation="1" // if left look and right look are both pressed, rearlook becomes activated
HMD Pitch Exponent="1.00000" // Exponent to apply to pitch tracking. > 1.0 makes tracking near-center slower, > 0 & < 1.0 makes tracking near-center faster.
HMD Yaw Exponent="1.00000" // Exponent to apply to yaw tracking. > 1.0 makes tracking near-center slower, > 0 & < 1.0 makes tracking near-center faster.
HMD Roll Exponent="1.00000" // Exponent to apply to roll tracking. > 1.0 makes tracking near-center slower, > 0 & < 1.0 makes tracking near-center faster.
Options Num Controls="68" // Number of configurable controls displayed in options
Freelook Mouse Pitch Speed="0.00100" // Freelook pitch speed when using mouse.
Freelook Mouse Yaw Speed="0.00100" // Freelook yaw speed when using mouse.
Freelook Keyboard Pitch Speed="1.50000" // Freelook pitch speed when using keyboard.
Freelook Keyboard Pitch Accel="4.00000" // Freelook pitch acceleration when using keyboard.
Freelook Keyboard Pitch Decel="4.00000" // Freelook pitch deceleration when using keyboard.
Freelook Keyboard Yaw Speed="1.50000" // Freelook yaw speed when using keyboard.
Freelook Keyboard Yaw Accel="4.00000" // Freelook Yaw acceleration when using keyboard.
Freelook Keyboard Yaw Decel="4.00000" // Freelook Yaw deceleration when using keyboard.
Freelook Up Limit="0.10000" // Freelook Up Limit, between 0 and 0.25.
Freelook Down Limit="-0.15000" // Freelook Down Limit, between 0 and -0.25.
 
Zuletzt bearbeitet:
U

User 841

Zweiter Teil:

TrackIR Pitch Down Limit="-0.15000" // Min: -1.00, Max: 0, Default: -0.15
TrackIR Pitch Up Limit="0.05000" // Min: 0, Max: 1.00, Default: 0.05
TrackIR Yaw Left Limit="-0.40000" // Min: -1.00, Max: 0, Default: -0.40
TrackIR Yaw Right Limit="0.40000" // Min: 0.00, Max: 1.00, Default: 0.40
TrackIR Roll Left Limit="-0.07500" // Min: -1.00, Max: 0.00, Default: -0.075
TrackIR Roll Right Limit="0.07500" // Min: 0.00, Max: 1.00, Default: 0.075
TrackIR Move Left Limit="-0.05000" // Min: -1.00, Max: 0.00, Default: -0.05
TrackIR Move Right Limit="0.05000" // Min: 0.00, Max: 1.00, Default: 0.05
TrackIR Move Down Limit="-0.05000" // Min: -1.00, Max: 0.00, Default: -0.05
TrackIR Move Up Limit="0.03000" // Min: 0.00, Max: 1.00, Default: 0.03
TrackIR Move Forward Limit="-0.25000" // Min: -1.00, Max: 0.00, Default: -0.25
TrackIR Move Back Limit="0.25000" // Min: 0.00, Max: 1.00, Default: 0.25
Axis [00, 00] Dead Zone="0.02000" // Controller 1 X
Axis [00, 00] Sensitivity="0.50000"
Axis [00, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues)
Axis [00, 01] Dead Zone="0.00000" // Controller 1 Y
Axis [00, 01] Sensitivity="0.50000"
Axis [00, 01] Center="1.00000"
Axis [00, 02] Dead Zone="0.00000" // Controller 1 Z
Axis [00, 02] Sensitivity="0.50000"
Axis [00, 02] Center="0.50000"
Axis [00, 03] Dead Zone="0.00000" // Controller 1 RX
Axis [00, 03] Sensitivity="0.50000"
Axis [00, 03] Center="0.50000"
Axis [00, 04] Dead Zone="0.00000" // Controller 1 RY
Axis [00, 04] Sensitivity="0.50000"
Axis [00, 04] Center="0.50000"
Axis [00, 05] Dead Zone="0.02000" // Controller 1 RZ
Axis [00, 05] Sensitivity="0.50000"
Axis [00, 05] Center="1.00000"
Axis [00, 06] Dead Zone="0.00000" // Controller 1 S0
Axis [00, 06] Sensitivity="0.50000"
Axis [00, 06] Center="0.50000"
Axis [00, 07] Dead Zone="0.00000" // Controller 1 S1
Axis [00, 07] Sensitivity="0.50000"
Axis [00, 07] Center="0.50000"
Axis [01, 00] Dead Zone="0.00000" // Controller 2 X
Axis [01, 00] Sensitivity="0.50000"
Axis [01, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues)
Axis [01, 01] Dead Zone="0.00000" // Controller 2 Y
Axis [01, 01] Sensitivity="0.50000"
Axis [01, 01] Center="0.50000"
Axis [01, 02] Dead Zone="0.00000" // Controller 2 Z
Axis [01, 02] Sensitivity="0.50000"
Axis [01, 02] Center="0.50000"
Axis [01, 03] Dead Zone="0.00000" // Controller 2 RX
Axis [01, 03] Sensitivity="0.50000"
Axis [01, 03] Center="0.50000"
Axis [01, 04] Dead Zone="0.00000" // Controller 2 RY
Axis [01, 04] Sensitivity="0.50000"
Axis [01, 04] Center="0.50000"
Axis [01, 05] Dead Zone="0.00000" // Controller 2 RZ
Axis [01, 05] Sensitivity="0.50000"
Axis [01, 05] Center="0.50000"
Axis [01, 06] Dead Zone="0.00000" // Controller 2 S0
Axis [01, 06] Sensitivity="0.50000"
Axis [01, 06] Center="0.50000"
Axis [01, 07] Dead Zone="0.00000" // Controller 2 S1
Axis [01, 07] Sensitivity="0.50000"
Axis [01, 07] Center="0.50000"
Axis [02, 00] Dead Zone="0.00000" // Controller 2 X
Axis [02, 00] Sensitivity="0.50000"
Axis [02, 00] Center="0.00000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues)
Axis [02, 01] Dead Zone="0.02000" // Controller 2 Y
Axis [02, 01] Sensitivity="0.50000"
Axis [02, 01] Center="1.00000"
Axis [02, 02] Dead Zone="0.02000" // Controller 2 Z
Axis [02, 02] Sensitivity="0.50000"
Axis [02, 02] Center="0.00000"
Axis [02, 03] Dead Zone="0.00000" // Controller 2 RX
Axis [02, 03] Sensitivity="0.50000"
Axis [02, 03] Center="0.50000"
Axis [02, 04] Dead Zone="0.00000" // Controller 2 RY
Axis [02, 04] Sensitivity="0.50000"
Axis [02, 04] Center="0.50000"
Axis [02, 05] Dead Zone="0.00000" // Controller 2 RZ
Axis [02, 05] Sensitivity="0.50000"
Axis [02, 05] Center="0.50000"
Axis [02, 06] Dead Zone="0.00000" // Controller 2 S0
Axis [02, 06] Sensitivity="0.50000"
Axis [02, 06] Center="0.50000"
Axis [02, 07] Dead Zone="0.00000" // Controller 2 S1
Axis [02, 07] Sensitivity="0.50000"
Axis [02, 07] Center="0.50000"
Control - Accelerate="(1, 140)"
Control - Brake="(1, 143)"
Control - Steer Left="(1, 2)"
Control - Steer Right="(1, 1)"
Control - Shift Up="(1, 14)"
Control - Shift Down="(1, 13)"
Control - Neutral="(0, 89)"
Control - Reverse Gear="(1, 59)"
Control - First Gear="(1, 52)"
Control - Second Gear="(1, 53)"
Control - Third Gear="(1, 54)"
Control - Fourth Gear="(1, 55)"
Control - Fifth Gear="(1, 56)"
Control - Sixth Gear="(1, 57)"
Control - Seventh Gear="(1, 58)"
Control - Clutch In="(1, 144)"
Control - Toggle AI Control="(0, 23)"
Control - Display Mode="(0, 89)"
Control - Change View="(0, 42)"
Control - Pit Request Position="(0, 8)"
Control - Pit Request Status="(0, 9)"
Control - Pit In Request="(1, 16)"
Control - Menu Select="(0, 28)"
Control - Menu Up="(0, 89)"
Control - Menu Down="(0, 89)"
Control - Menu Inc="(0, 205)"
Control - Menu Dec="(0, 203)"
Control - Speed Limiter="(1, 15)"
Control - Bias Forward="(0, 89)"
Control - Bias Rearward="(0, 89)"
Control - Look Left="(0, 47)"
Control - Look Right="(0, 49)"
Control - Rear Look="(0, 48)"
Control - Instant Replay="(0, 19)"
Control - Pause="(0, 25)"
Control - Toggle Free Look="(0, 89)"
Control - Zero Free Look="(0, 89)"
Control - Center TrackIR="(1, 20)"
Control - Display Vehicle Labels="(1, 19)"
Control - Reset Car="(0, 18)"
Control - Ignition="(1, 17)"
Control - Starter="(1, 18)"
Control - Horn="(0, 89)"
Control - Headlights="(1, 40)"
Control - Handbrake="(0, 89)"
Control - Look Up="(0, 89)"
Control - Look Down="(0, 89)"
Control - Look Roll Left="(0, 89)"
Control - Look Roll Right="(0, 89)"
Control - Adjust Seat Fore="(0, 32)"
Control - Adjust Seat Aft="(0, 30)"
Control - Adjust Seat Up="(0, 17)"
Control - Adjust Seat Down="(0, 31)"
Control - Time Acceleration="(0, 37)"
Control - Toggle Mirror="(0, 2)"
Control - Toggle HUD="(0, 89)"
Control - Toggle MoTeC="(0, 4)"
Control - Realtime Chat="(0, 46)"
Control - Quick Chat #1="(0, 89)"
Control - Quick Chat #2="(0, 89)"
Control - Quick Chat #3="(0, 89)"
Control - Quick Chat #4="(0, 89)"
Control - Quick Chat #5="(0, 89)"
Control - Quick Chat #6="(0, 89)"
Control - Quick Chat #7="(0, 89)"
Control - Quick Chat #8="(0, 89)"
Control - Quick Chat #9="(0, 89)"
Control - Quick Chat #10="(0, 89)"
 
Zuletzt bearbeitet:
U

User 841

Dritter Teil:

FFB Device Type="4" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad.
FFB Effects Level="4" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom.
FFB Gain="1.00000" // Strength of Force Feedback effects. Range 0.0 to 1.0.
FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.
FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis.
FFB steer vibe freq mult="0.07000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration.
FFB steer vibe zero magnitude="0.03500" // Magnitude of steering vibration at 0mph (reference point).
FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude).
FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB steer force average weight="0.90000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency.
FFB steer force exponent="0.75000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity.
FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction).
FFB steer force output max="1.70000" // Maximum force output of steering force, recommendation 0.8 to 2.0
FFB steer force grip weight="1.00000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force.
FFB steer force grip factor="0.80000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6. How much of a factor the front wheel grip is on the steering weight.
FFB steer update thresh="0.0001500000" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate.
FFB steer friction coefficient="0.10000" // Coefficient to use for steering friction. Range: -1.0 to 1.0
FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0
FFB steer damper coefficient="0.10000" // Coefficient to use for steering damper. Range: -1.0 to 1.0
FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0
FFB throttle vibe freq mult="0.40000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50
FFB throttle vibe zero magnitude="0.09000" // Magnitude of engine vibration at 0rpm (reference point).
FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude).
FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB throttle vibe update thresh="0.02000" // Amount of change required to update throttle vibe (0.0 - 1.0)
FFB brake vibe freq mult="0.90000" // Scales actual brake rotational frequency to force feedback vibration frequency.
FFB brake vibe zero magnitude="0.09000" // Magnitude of brake vibration at 0mph (reference point).
FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude).
FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB brake vibe update thresh="0.02000" // Amount of change required to update brake vibe (0.0 to 1.0)
FFB rumble strip magnitude="0.25000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect.
FFB rumble strip freq mult="0.50000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev.
FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB rumble strip pull factor="-0.70000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5.
FFB rumble strip update thresh="0.07500" // Amount of change required to update rumble strip effect (0.0 - 1.0)
FFB jolt magnitude="1.30000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0.
FFB Joy[00] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[02] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[02] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[03] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[03] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[04] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[04] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[05] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[05] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[06] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
 
U

User 841

Und hoffentlich der letzte!!!:

FFB Joy[00] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[06] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[07] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[07] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring

FFB Joy[01] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[02] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[02] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[03] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[03] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[04] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[04] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[05] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[05] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[06] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[06] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[07] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[07] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[02] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[02] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[03] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[03] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[04] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[04] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[05] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[05] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[06] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[06] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[07] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[07] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
 
Du musst dich einloggen, um zu antworten.
Oben